Specification
| Hardware Specifications | ||
| Hardware Version | V1 | |
| Interface | 10 x 1000 M b p s S F P S l o t s
8×10/100/1000Mbps RJ45 Ports 1xConsole Port |
|
| Port Standard | IEEE 802.3 i:10BASE-T Ethernet; IEEE 802.3 u:100BASE-X Fast Ethernet; IEEE 802.3ab:1000BASE-T Gigabit Ethernet; IEEE 802.3z:1000BASE-X Gigabit Ethernet(Optical fiber) |
|
| Power Supply | 100-240V AC~50/60 Hz | |
| Standby Power Consumption | 115V 60Hz-25W
230V 50Hz-24.9W |
|
| Switching Capacity | 36Gbps | |
| Packet Forwarding Rate | 26.78Mpps | |
| Jumbo Frame | 10KB | |
| MAC Address Table | 8K | |
| DRAM | 128MB | |
| Flash | 16MB | |
| Dimensions ( W x D x H ) | 280*180*44mm | |
| Fan Quantity | 1 Fan | |
| Protection Level | Common Mode ± 6KV, Differential Mode ± 4KV | |
| Electrostatic Standard | Contact 6KV Air 8KV | |
| Transmission Mode | Store— Forward | |
| Installation | Rack- Mounted | |
| Software Features | ||
|
Spanning Tree |
IEEE 802.1D – STP | |
| IEEE 802.1w – RSTP | ||
| IEEE 802.1s – MSTP | ||
| BPDU Guard | ||
|
VLAN |
VLAN Group（Max 4K VLAN Groups） | |
| Voice VLAN | ||
| Protocol VLAN | ||
| MAC VLAN | ||
| Surveillance VLAN | ||
| Q- in-Q | ||
| GVRP | ||
|
Port |
Link Aggregation | LACP |
| Static | ||
| Up to 8 aggregation groups and up to 8 ports per group | ||
| EEE | ||
| Jumbo Frame | ||
| Error- Disable | ||
| Port mirroring | One-to-One | |
| Many-to-One | ||
| Tx/Rx/Both | ||
| Loop Detection | Port based | |
| VLAN based | ||
|
ACL |
MAC ACL | Source MAC |
| Destination MAC | ||
| Ether Type | ||
| VLAN ID | ||
| User Priority | ||
| 802.1p | ||
| IPV4 ACL / IPV6ACL | Source IP | |
| Destination IP | ||
| IP Protocol | ||
| Type of Service | ||
| User Priority | ||
| Source Port | ||
| Destination Port | ||
| ICMP Type | ||
| ICMP Code | ||
| TCP Flags | ||
| Security | RADIUS/TACACS+ | |
| RADIUS Authentication ( RFC2138) | ||
| AAA | Console | |
| Telnet | ||
| SSH | ||
| HTTP | ||
| HTTPS | ||
| Management Access | Management Service | |
| Management ACL | ||
| Authentication Manager | 802.1X | |
| MAC-Based | ||
| WEB-Based | ||
| Guest VLAN | ||
| Broadcast Storm | Broadcast | |
| Unknown Multicast | ||
| Unknown Unicast | ||
| Kbits/Packet control mode | ||
| Protected Port | ||
| Port Security | ||
| IP Source Guard | ||
| Dynamic ARP Inspection | ||
| SSH v1.5/v2 .0 | ||
| Anti- DDoS Attack | ||
| DHCP Snooping | ||
|
QoS |
8 priority queues | |
| 802.1p CoS/DSCP priority | ||
|
Queue scheduling
|
SP (Strict Priority) | |
| WRR (Weighted Round Robin) | ||
| SP+WRR | ||
| IP Precedence Mapping | ||
| Rate Limit | Ingress / Egress Port | |
| Egress Queue | ||
|
L2 Multicast |
Multicast | Group Address |
| Router Port | ||
| Forward All | ||
| Throttling | ||
| Filtering Profile | ||
| IGMP Snooping | IGMP Statistics | |
| IGMP Querier | ||
| IGMP Snooping v2/v3 | ||
| MLD Snooping | MLD v1/v2 Snooping | |
| MLD Snooping Statistics | ||
| MVR | Property | |
| Port Setting | ||
| Group Address | ||
|
IPV6 |
Ipv6/IPv4 | |
| Ipv6 Web/SSL | ||
| Ipv6 SNTP | ||
| Ipv6 Telnet/SSH | ||
| Ipv6 Ping/Traceroute | ||
| Ipv6 TFTP | ||
| Ipv6 RADIUS/TACACS+ | ||
| Ipv6 SNMP | ||
|
Management |
Web-based GUI | |
| Command Line Interface (CLI) through the console port, telnet | ||
| SNMP (v1 , v2c , v3 ) | ||
| Trap/Inform | ||
| RMON ( 1 , 2 , 3 & 9 ) | ||
| Firmware Upgrade | ||
| Configuration Export/import | ||
| System Log | ||
| LLDP ( IEEE802.1AB) | ||
| LLDP- MED | ||
| UDLD | ||
| DNS Client | ||
| Traceroute | ||
| Copper Test | ||
| Fiber Module | ||
| Ping | ||
| NTP/ SNTP ( RFC2030) | ||
|
Advanced Features |
ONVIF (ONVIF Detection , ONVIF Server(NLM) ) | |
| Batch Firmware Upgrading | ||
| Intelligent Network Monitoring | ||
| Abnormal Event Warnings | ||
| Automatic Device Discovery | ||
| Support Cloud Management | ||
| Support Remote Management | ||
| Support Cloud VLAN Configuration | ||
| Support Topology Display | ||
| Support Cloud Control Port Configuration | ||
| Certfication | CE , FCC , RoHS | |
| Environment | Operating Temperature: 0–40 ℃ Storage Temperature: -40– 70 ℃ Operating Humidity: 10– 90% RH non-condensing Storage Humidity: 5– 90% RH non-condensing |
|
Be the first to review “Wi-Tek WI-CGS5018 Cloud L2 Managed Fiber Aggregation Switch”
Reviews
There are no reviews yet.