The TP-link CPE220 2.4GHz 300Mbps 12dBi Outdoor CPE is a high-performance wireless solution designed for long-range outdoor connectivity. With its advanced features and durable design, this CPE delivers reliable and high-speed internet access in various scenarios.
The CPE220 features a built-in 12dBi 2×2 dual-polarized directional MIMO antenna, ensuring exceptional signal strength and coverage. This powerful antenna allows for reliable data transmission over long distances, making it an ideal choice for outdoor wireless applications.
Moreover, the CPE220 offers adjustable transmission power from 0 to 30dBm/1000mw, providing flexibility in optimizing the wireless performance based on specific deployment needs. This capability enables you to fine-tune the signal strength to achieve the best possible connectivity over varying distances.
The system-level optimizations incorporated into the CPE220 make it capable of long-range wireless transmission of more than 13km. This extensive range allows for seamless connectivity between distant locations, making it perfect for providing internet access to remote areas or connecting separate buildings in a campus environment.
The TP-LINK Pharos MAXtream TDMA technology enhances the product’s performance by improving throughput, capacity, and latency. This makes it an ideal choice for Point-to-Multi-Point (PTMP) applications, where multiple CPEs connect to a central access point, ensuring efficient and reliable data transmission in crowded network environments.
With its versatile operation modes, the CPE220 adapts to various networking needs. It can be configured as an Access Point (AP), Client, Bridge, Repeater, AP Router, or AP Client Router (WISP). This flexibility allows you to set up the CPE according to your specific networking requirements.
The Pharos Control centralized management system streamlines network administration, allowing you to manage multiple CPEs from a single location. This makes it easier to monitor, configure, and maintain the outdoor network, saving time and effort in network management tasks.
Additionally, the CPE220 supports Passive PoE (Power over Ethernet) deployment of up to 60 meters (200 feet), enabling remote reset and power management. This feature is particularly valuable for outdoor installations, as it simplifies the setup process and reduces the need for separate power cables.
In conclusion, the TP-link CPE220 2.4GHz 300Mbps 12dBi Outdoor CPE is a robust and high-performance wireless solution for long-range outdoor connectivity. With its powerful antenna, adjustable transmission power, long-range capabilities, Pharos MAXtream TDMA technology, versatile operation modes, Pharos Control management system, and Passive PoE support, this CPE ensures reliable and efficient internet access for various outdoor applications. Whether you’re providing internet access in remote areas, extending network coverage between buildings, or establishing outdoor wireless connections, the CPE220 delivers exceptional performance and reliability in challenging outdoor environments. View All Products
| Weight | 0.88 kg |
|---|---|
| Dimensions | 11 × 5.7 × 3.4 cm |
Specification
In conclusion, the TP-link CPE220 2.4GHz 300Mbps 12dBi Outdoor CPE is a robust and high-performance wireless solution for long-range outdoor connectivity. With its powerful antenna, adjustable transmission power, long-range capabilities, Pharos MAXtream TDMA technology, versatile operation modes, Pharos Control management system, and Passive PoE support, this CPE ensures reliable and efficient internet access for various outdoor applications. Whether you’re providing internet access in remote areas, extending network coverage between buildings, or establishing outdoor wireless connections, the CPE220 delivers exceptional performance and reliability in challenging outdoor environments.
| HARDWARE FEATURES | |
|---|---|
| Processor | Qualcomm Atheros 560MHz CPU, MIPS 74Kc |
| Memory | 64MB DDR2 RAM, 8MB Flash |
| Interface | 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1) 1 Grounding Terminal 1 Reset Button |
| Power Supply | Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC |
| Power Consumption | 10.8 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. |
| Dimensions ( W x D x H ) | 11×3.1×2.1 inch (276×79×60 mm) |
| Antenna Type | Built-in 12dBi 2×2 Dual-polarized Directional Antenna Beam Width: 60° (H-Plane) / 30° (E-Plane) Note: For more details, please refer to datasheet |
| Protection | 15KV ESD Protection 6KV Lightning Protection |
| Enclosure | Outdoor ASA stabilized plastic material IPX5 waterproof Certification |
| WIRELESS FEATURES | |
|---|---|
| Wireless Standards | IEEE 802.11b/g/n (with Pharos MAXtream disabled) |
| Proprietary Protocol | TDMA Mode (with Pharos MAXtream enabled) |
| Wireless Speeds | Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) |
| Frequency | 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. |
| Transmission Power | 30dBm/1000mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. |
| SOFTWARE FEATURES | |
|---|---|
| Wireless Configurations | Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
| Management | Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server |
| System Tools | Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute |
| System-level Optimizations | Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog |
| POE ADAPTER FEATURES | |
|---|---|
| Dimensions(W x D x H) | 110×57×33.5mm |
| Interfaces | 1 AC Jack with Earth Ground 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data) 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Data) |
| Button | Remote Reset Button |
| Power Status LEDs | 0~0.8A: Green 0.8A~1.0A: Red |
| Input | 100-240VAC, 50/60Hz |
| Input Voltage | 100VA~240VAC @ 50Hz~60Hz |
| Input Current | 0.8A Max @ 100VAC |
| Output | 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) |
| Output Voltage | 24VDC(+4,5pins; -7,8pins) |
| Efficiency | >80% |
| Certifications | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
| OTHERS | |
|---|---|
| Certification | CE, FCC, RoHS, IPX5 |
| Package Contents | Outdoor Wireless CPE 24V 0.6A Passive PoE Adapter Pole Mounting Straps AC Power Cord Installation Guide |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. |
| Environment | Operating Temperature: -40℃~70℃ (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.